LEGO Sagrada – LEGO has opened pre-orders for the Architecture Sagrada Família (21065) — a 12,060-piece, 18+ display model priced at $799.99 / £649.99 / €749.99. The set launches November 1, 2026 after a delay, and LEGO recreates the church’s final tower profile with a 1:280
When the Sagrada Família’s Christ tower was finally completed in the real world this year, LEGO seemed ready to answer with its own kind of patience: a new Architecture set that leans fully into scale, detail, and the long wait.
LEGO has officially introduced the LEGO Sagrada Família (21065) and made it available for pre-order at LEGO.com. Fans won’t be able to buy it outright for a little while yet. The set is scheduled to be released on November 1, 2026, and it will carry a suggested retail price of $799.99 / £649.99 / €749.99. It’s set to be sold at LEGO.com and Brand Stores.
Pre-order starts now, and LEGO has said the set will be initially exclusively available at LEGO. A release at selected retailers is planned for 2027.
The announcement also comes with a clear correction to earlier expectations. Contrary to the first rumors, the LEGO Sagrada Família won’t be released in July. It has been pushed back to November 2026. Even the pricing has shifted from what some people had been expecting: the pre-order price is significantly higher than the rumored figure circulating earlier.
Today’s reveal wasn’t only about product timing. It also follows the June 10 milestone: the Christ tower of the real Sagrada Família will be officially inaugurated in a ceremony led by Pope Leo XIV in Barcelona—about 144 years after the groundbreaking of the still-not-quite-completed building.
The set itself is aimed squarely at adult builders. The LEGO Sagrada Família (21065) includes 12,060 pieces, comes without minifigures, and is rated 18+. It’s also sticker-free. The model measures 62 cm × 47 cm × 39 cm (24 × 18.5 × 15 in), and LEGO describes the scale as approximately 1:280.
Set number 21065, “Sagrada Família,” is built as an end-state display piece. In LEGO’s recreation. the church appears in its “final state” without cranes and scaffolding that can still be seen at the construction site. LEGO recreates the monumental church with all 18 towers: twelve towers representing the apostles (four each at the Nativity. Passion. and Glory facades). four towers for the evangelists. one tower for the Virgin Mary. and one tower for Jesus Christ himself.
The model also plays with the timing of reality. While the central Christ tower will be inaugurated this year. LEGO’s version anticipates a later finish—because decorative work on the facades and the entrance stairs is still unfinished in Barcelona and is expected to continue until approximately 2033 to 2035.
Inside the box, the work is designed to be more than brute-force counting. Depending on experience, the pure build time is estimated at 25 to 35 hours. The LEGO Builder app is highlighted as part of the experience. with 3D instructions that let builders zoom and rotate. while saving and tracking progress.
LEGO’s product description lays out the build sequence as well: it begins with the Apse with Crypt. then moves through the Nativity façade—described as the only part Antoni Gaudí completed before his passing—followed by the Passion façade. The build then covers the naves and the Western Sacristy. before completing the 6 towers and finishing the basilica with the Eastern Sacristy and the Glory façade. Once the final brick is placed, the model can be displayed with an elegant nameplate on the base.
A set that big invites comparison, and LEGO has not shied away from the context. The Sagrada Família is presented as the largest LEGO set by piece count for 2026. placing it among the top 10 largest LEGO sets of all time by pieces. It replaces LEGO Art 31203 World Map. which had been the previously largest LEGO set by piece count since it was released in 2021.
Still, size doesn’t just mean pieces. The set is 62 cm tall (24 in). 47 cm wide (18.5 in). and about 34 cm deep (15 in) when fully built. and the dimensions are said to leave it behind the earlier LEGO Minas Tirith release. That set, which LEGO released just a few days earlier, contains 8,278 pieces.
The new Sagrada Família also comes with another comparison that sits beyond LEGO’s shelf. At its highest point, the real Sagrada Família is described as 172.5 m. LEGO’s scale places the model around 1:280 against that height. And while the LEGO set sets a record for its own category. the real building is also framed in a larger architectural story: the real Sagrada Família is not the tallest building in the world. but it replaces Ulm Minster (161.5 m) as the tallest church in the world. Ulm Minster previously held the title for 135 years. The tower’s lack of extra height is linked. in anecdotal accounts. to Gaudí’s “modesty. ” with the idea that he wanted the work to not exceed “God’s work. ” and to keep the tower below the approximately 173-meter-tall hill Montjuïc in Barcelona.
For LEGO Architecture fans, the most direct shelf comparison is another church model: LEGO 21061 Notre-Dame de Paris, released in 2024. A digital placement comparison is described as placing the model of the Sagrada Família in Barcelona next to the cathedral in Paris.
There’s also a detail that makes this set feel different from LEGO’s usual approach to religious buildings. LEGO has rarely used religious symbols in its own sets. and with the Sagrada Família. the “Torre de Jesucristo” (Christ tower) was only completed this year. That tower is equipped with a huge cross made of stainless steel. ceramic. and glass manufactured in Germany (Gundelfingen in Bavaria). and LEGO says it has faithfully recreated that cross.
The set also revisits a long-running myth about LEGO itself. For years, a claim has persisted that LEGO would not build religious models. That statement isn’t documented. What LEGO does have. instead. is a wish for models that won’t display war. violence. sexual content. and religion at LEGO co-organized fan exhibitions. along with similar rules for LEGO Ideas.
Over the years, several sets are listed as having been released that include religious buildings, including LEGO 21026 Venice, LEGO 21056 Taj Mahal, LEGO 21015 The Leaning Tower of Pisa, and the earlier LEGO 21061 Notre-Dame de Paris.
Even the parts list reads like a careful engineering plan, not a generic re-skin. For the Gaudí architecture look, some parts are used in new colors in the Sagrada. New in color Tan are small flowers (6901) used for the first time for filigree details. paired with the 1×2 Plate with Long Stud Holder (4596) known from old Classic Space sets. The Trophy Figures (53017) in Tan are also newly included, and the horn (34078) is new in Tan.
A rarely seen technique is also part of the build: 2×2 turntables. with the bottom part used individually as a decorative element for the windows. The part has never been used without its counterpart recently. and the technique is described as explicitly forbidden in the BrickLink Designer Program. Similar to the old LEGO 10256 Taj Mahal, an exception is said to have been made for the Sagrada Família.
For the winged statues on the tower tops, white binoculars (30162) are used. Below them, parts originally introduced as drill heads (28598) in Tan are used at the tips.
And when it comes to the parts that make up the “outer wall,” the set is described as including at least two different prints on 2×3 Nexo Knight shields, plus printed 2×4 tiles and large 16×4 wedges on the towers.
All of this adds up to a specific kind of appeal: the LEGO Architecture team is building a “pure display piece” over 12,000 pieces at least somewhat to scale, without having to compromise for minifigure compatibility—unlike a set such as Minas Tirith.
The real-world counterpart is still moving. The LEGO version presents the church as it could look in its finished tower profile. and the box back is described as showing the building in multiple construction states: from 1882 to 1977. or from 1978 to 2018. That modular approach is described as being based on assembling the Sagrada Família from different sections.
LEGO isn’t hiding the scale of the challenge either. With its 12. 060 pieces. the set works out to a price per piece of around 6.6 cents (US) per piece at the $799.99 RRP. The set’s overall footprint is impressive. but the story also makes clear that in dimensions it won’t outclass every other LEGO model. And in real completion terms—at least by Gaudí’s cathedral timeline—the comparison is almost impossible to win: the church in Barcelona still isn’t finished.
The pre-order window is open now, but the wait until November 1, 2026 is part of the point. LEGO is turning a global landmark—still under construction in reality—into a product built for slow attention, long building sessions, and a display shelf that demands space.
Because once the last brick is set, that’s the only thing left to do: make room for it.
LEGO Sagrada Família 21065 LEGO Architecture pre-order 12060 pieces November 1 2026 18+
12k pieces?? That’s like a second job.
Wait so it’s $799 for LEGO?? I saw 12,060 pieces and thought it was a typo or like on sale or something. Also 18+… does that mean it’s actually hard to build or just for adults to feel fancy?
The delay part is funny, I swear LEGO always delays when they realize people will buy it anyway. “Final tower profile”?? Like they modeled it after the church got finished this year but didn’t we already have like 100 Sagrada sets before this? Idk I’m just salty it’s exclusive at first.
This is gonna be one of those things where rich people flex it in the background. I don’t get why it needs to be 1:280 scale like are you supposed to measure your living room too? And November 2026 is so far out, by then prices gonna jump or they’ll cancel the whole thing like they do with other exclusives. Also $799.99… my stomach hurts.